Acest anunt nu mai este valabil
Lamm LP2 Deluxe Phono Stage
Lamm LP2 Deluxe Phono Stage
Categorie: PreamplificatoareBrand: Lamm
Stare: Produs utilizat
Tip preamplificator: Phono
Top Condition! World Wide Shipping!
Low paypal fee and shipping rates.
ORIGINAL WOODEN BOX FOR SAFE SHIPPING!
Specifications:
Rated Output Voltage F = 1KHz:
MM input to output 0.125 Volts RMS.
MC input to output 0.125 Volts RMS.
Voltage Gain F = 1KHz:
MM input to output 75.5 + 2% or 37.65 + 0.2dB.
MC input to output 750 + 2% or 57.5 + 0.2dB.
RIAA Accuracy from 20 Hz – 20 KHz: better than + 0.0 dB/-0.5 dB.
Total Harmonic Distortion from 20 Hz – 20 KHz; no more than 0.1%.
Input Sensitivity Vout=0.125 Volts RMS, F = 1KHz:
MM input: 1.66 millivolts RMS + 2%.
MC input: 0.167 millivolts RMS + 2%.
Input Impedance:
MM input: 47 KOhms shunted by 200 pF
MC input: 400 Ohms.
Corrected output impedance: typically 3.5 KOhms.
Signal-to-noise ratio, below 1 Volts RMS output, A weighted:
MM input to output (shorted input): better than 88dB.
MC input to output (shorted input): better than 87dB.
Absolute Phase: non-inverting.
Input voltage range: 100-240 Volts, 50/60Hz ±10%.
One power transformer; two filter chokes; one full-wave vacuum rectifier; one solid-state analog non-switching voltage regulator.
AC voltage intensively filtered by special RFI power line filter.
Power Supply Energy Storage deluxe version: approximately 150 Joules
Safety: Unique electronic protection circuit enables muting of the outputs until the preamplifier is stabilized after a turn-on, and automatic switching to muting in case the AC line drops or is interrupted.
Power Consumption: Typically 70 Watts.
Burn-in Time at Factory: Minimum 72 hours.
Recommended Burn-in Time in end-user’s System: Minimum 100 hours.
Unit dimensions: 4.5 inches high x 19 inches wide x 13.875 deep + 1.375 inches for front handles.
Crate dimensions: 23″ x 19″ x 10″ (58.42cm x 48.26cm x 25.4cm)
Unit weight deluxe version: 41.5 Lbs (18.84 Kg).
Shipping weight deluxe version: 62.6 Lbs (28.42 Kg).
MADE IN USA.
Low paypal fee and shipping rates.
ORIGINAL WOODEN BOX FOR SAFE SHIPPING!
Specifications:
Rated Output Voltage F = 1KHz:
MM input to output 0.125 Volts RMS.
MC input to output 0.125 Volts RMS.
Voltage Gain F = 1KHz:
MM input to output 75.5 + 2% or 37.65 + 0.2dB.
MC input to output 750 + 2% or 57.5 + 0.2dB.
RIAA Accuracy from 20 Hz – 20 KHz: better than + 0.0 dB/-0.5 dB.
Total Harmonic Distortion from 20 Hz – 20 KHz; no more than 0.1%.
Input Sensitivity Vout=0.125 Volts RMS, F = 1KHz:
MM input: 1.66 millivolts RMS + 2%.
MC input: 0.167 millivolts RMS + 2%.
Input Impedance:
MM input: 47 KOhms shunted by 200 pF
MC input: 400 Ohms.
Corrected output impedance: typically 3.5 KOhms.
Signal-to-noise ratio, below 1 Volts RMS output, A weighted:
MM input to output (shorted input): better than 88dB.
MC input to output (shorted input): better than 87dB.
Absolute Phase: non-inverting.
Input voltage range: 100-240 Volts, 50/60Hz ±10%.
One power transformer; two filter chokes; one full-wave vacuum rectifier; one solid-state analog non-switching voltage regulator.
AC voltage intensively filtered by special RFI power line filter.
Power Supply Energy Storage deluxe version: approximately 150 Joules
Safety: Unique electronic protection circuit enables muting of the outputs until the preamplifier is stabilized after a turn-on, and automatic switching to muting in case the AC line drops or is interrupted.
Power Consumption: Typically 70 Watts.
Burn-in Time at Factory: Minimum 72 hours.
Recommended Burn-in Time in end-user’s System: Minimum 100 hours.
Unit dimensions: 4.5 inches high x 19 inches wide x 13.875 deep + 1.375 inches for front handles.
Crate dimensions: 23″ x 19″ x 10″ (58.42cm x 48.26cm x 25.4cm)
Unit weight deluxe version: 41.5 Lbs (18.84 Kg).
Shipping weight deluxe version: 62.6 Lbs (28.42 Kg).
MADE IN USA.
Detalii anunt
Membru din iulie 2015.
Bucuresti
13.08.2019 20:30:10
599 vizualizari
0 persoane interesate
Vanzator companie
3499€