Solutie Van den Hul The Solution contact cleaner pentru curatarea conectorilor / cablurilor
Solutie Van den Hul The Solution contact cleaner pentru curatarea conectorilor / cablurilor
Categorie: CabluriBrand: Van den Hul
Stare: Produs nou
*Raspund doar telefonic, nu dati mesaje!*
Vand solutie Van den Hul The Solution contact cleaner pentru curatarea conectorilor / cablurilor, noi, sigilate, la cel mai bun pret.
Toata gama de produse Van den Hul disponibila in stoc, pentru alte produse intrebati!
VdH The Solution se utilizeaza pentru curatarea si intretinerea si lubrifierea conectorilor / contactelor. Ajuta si impotriva aparitiei coroziunii in timp.
Toate produsele comercializate vin insotite de factura + bon fiscal/chitanta dupa caz.
Poze reale ale produselor.
Pret: 199 lei/buc TVA inclus.
Contact: 0726415513.
Daca ai gasit in alta parte mai ieftin, trimite-ne link-ul si vom reveni cu o contraoferta!
THE SOLUTION CONTACT TREATMENT AND PROTECTION FLUID
TRUE TRANSMISSION TECHNOLOGY * HYBRID DESIGN * HALOGEEN FREE
The SOLUTION has been developed for audio applications. It cleans, lubricates and protects contacts with time stable results and sound improvement. (We apply it to all our interconnects before packing)
Why clean and lubricate audio contacts? They form an often over looked vulnerable part that tends to wear, get dirty and even corrode.
Lubricated connectors have reduced wearing out. Plugging and unplugging interconnects and loudspeaker cables will inevitably wear out the terminals if not properly lubricated.
Clean connectors ensure perfect metal-to-metal contact. There’s no dirt acting as a semi conductive layer between parts and even the weakest audio signal flows free and unadulterated.
Definition, resolution and overall ambience are enhanced with clean connectors. Dirt acts as a barrier causing the audio signal to intermodulate with the (noisy) ground leakage currents (*) flowing through the shielding of contacts and interconnects.
Clean connectors also prevent from burn-in effects and directionality.
3 functions: contact cleaning; stabilize despite air pollution; lubricates parts preventing them from wearing out.
25cc brush cap bottle (it will last for years)
Applying tips: Pre-clean the contacts by rubbing them thoroughly using a paper towel wet with pure alcohol (Never use sandpaper!).
Apply the slightly dipped brush along the contacts surfaces. No copious amounts are necessary.
Product properties remain stable over time.
(*) To minimize the noisy ground leakage currents, please refer to our POLARITY CHECKER).
Van den Hul The Solution Contact Cleaner and Treatment
Why care for your audio contacts?
The electrical audio contacts made by the interconnects in your installation represent an often overlooked vulnerable part in the audio signal path and much harm can be done to the audio signal transferred at these points.
Through frequent plugging and unplugging your contacts will start to wear. Also, the connector contacts will unavoidably start to pick up pollution and even might corrode somewhat.
With polluted connectors there will be no perfect metal to metal contact; On microscale there will be some semiconductive layer in between, building a barrier for the weakest audio signals where terms as resolution, ambience and definition reside.
Also through this messy non-linear contact barrier the audio signal current will start to intermodulate with the noisy ground leakage currents flowing through the shield contacts and shields of your interconnects.
The Solution:
The metal-metal contact between e.g. the binding post and the cable connector must be kept clean and durable without any interference from the outside world.
We therefore supply The Solution, an ageing free contact fluid specially intended for audio applications.
The Solution performs three simple but useful functions:
- Contact cleaning.
- Stabilising contacts against chemical attack from atmospheric pollutants.
- Contact lubrication, reducing subtraction and insertion wear on the connector’s precious metals.
The Solution is standardly applied to all our interconnects before packing. With our RCA type connectors the fluid slips in the gap of the centre pin and spreads around after connecting in the female chassis plug. So the first treatment is already there. From experience we know that the result is time stable and helps improve the sound.
*Raspund doar telefonic, nu dati mesaje!*
Vand solutie Van den Hul The Solution contact cleaner pentru curatarea conectorilor / cablurilor, noi, sigilate, la cel mai bun pret.
Toata gama de produse Van den Hul disponibila in stoc, pentru alte produse intrebati!
VdH The Solution se utilizeaza pentru curatarea si intretinerea si lubrifierea conectorilor / contactelor. Ajuta si impotriva aparitiei coroziunii in timp.
Toate produsele comercializate vin insotite de factura + bon fiscal/chitanta dupa caz.
Poze reale ale produselor.
Pret: 199 lei/buc TVA inclus.
Contact: 0726415513.
Daca ai gasit in alta parte mai ieftin, trimite-ne link-ul si vom reveni cu o contraoferta!
THE SOLUTION CONTACT TREATMENT AND PROTECTION FLUID
TRUE TRANSMISSION TECHNOLOGY * HYBRID DESIGN * HALOGEEN FREE
The SOLUTION has been developed for audio applications. It cleans, lubricates and protects contacts with time stable results and sound improvement. (We apply it to all our interconnects before packing)
Why clean and lubricate audio contacts? They form an often over looked vulnerable part that tends to wear, get dirty and even corrode.
Lubricated connectors have reduced wearing out. Plugging and unplugging interconnects and loudspeaker cables will inevitably wear out the terminals if not properly lubricated.
Clean connectors ensure perfect metal-to-metal contact. There’s no dirt acting as a semi conductive layer between parts and even the weakest audio signal flows free and unadulterated.
Definition, resolution and overall ambience are enhanced with clean connectors. Dirt acts as a barrier causing the audio signal to intermodulate with the (noisy) ground leakage currents (*) flowing through the shielding of contacts and interconnects.
Clean connectors also prevent from burn-in effects and directionality.
3 functions: contact cleaning; stabilize despite air pollution; lubricates parts preventing them from wearing out.
25cc brush cap bottle (it will last for years)
Applying tips: Pre-clean the contacts by rubbing them thoroughly using a paper towel wet with pure alcohol (Never use sandpaper!).
Apply the slightly dipped brush along the contacts surfaces. No copious amounts are necessary.
Product properties remain stable over time.
(*) To minimize the noisy ground leakage currents, please refer to our POLARITY CHECKER).
Van den Hul The Solution Contact Cleaner and Treatment
Why care for your audio contacts?
The electrical audio contacts made by the interconnects in your installation represent an often overlooked vulnerable part in the audio signal path and much harm can be done to the audio signal transferred at these points.
Through frequent plugging and unplugging your contacts will start to wear. Also, the connector contacts will unavoidably start to pick up pollution and even might corrode somewhat.
With polluted connectors there will be no perfect metal to metal contact; On microscale there will be some semiconductive layer in between, building a barrier for the weakest audio signals where terms as resolution, ambience and definition reside.
Also through this messy non-linear contact barrier the audio signal current will start to intermodulate with the noisy ground leakage currents flowing through the shield contacts and shields of your interconnects.
The Solution:
The metal-metal contact between e.g. the binding post and the cable connector must be kept clean and durable without any interference from the outside world.
We therefore supply The Solution, an ageing free contact fluid specially intended for audio applications.
The Solution performs three simple but useful functions:
- Contact cleaning.
- Stabilising contacts against chemical attack from atmospheric pollutants.
- Contact lubrication, reducing subtraction and insertion wear on the connector’s precious metals.
The Solution is standardly applied to all our interconnects before packing. With our RCA type connectors the fluid slips in the gap of the centre pin and spreads around after connecting in the female chassis plug. So the first treatment is already there. From experience we know that the result is time stable and helps improve the sound.
*Raspund doar telefonic, nu dati mesaje!*
Detalii anunt
Membru din martie 2013.
Bucuresti
06.10.2021 19:14:23
567 vizualizari
4 persoane interesate
Vanzator companie
199L
Reclame
