4K HDR Video demo: https://youtu.be/cAuIJ4U53Xs

Ocazie rară!!
La vânzare un super pickup Victor QL-Y66F în stare impecabilă estetic și funcțional.

Echipat cu braț S, mult mai scump dar și mai rar, braț pe care puteti interschimba dozele cu ușurință într-un minut. Versiune JP/100V, inclus în preț adaptor 220/240-100V.
Bonus doza MM Fidelity Research FR-5 plus headshell original Victor.
Capacul original este în curs de polishare și va arăta la fel de frumos, transparent, nu are zgârieturi majore, voi atașa o poză la final.

Posibilitate de echipare și cu braț drept original care vine cu headshell integrat și cu aceeași doză la un preț redus cu 200 euro. Detalii telefonic.

Toate funcțiile automate merg fără probleme așa cum au fost proiectate, butoanele comuta ușor, coborârea brațului pe platan este lină și foarte silențioasă.
Estetic toate colțurile și muchiile sunt impecabile, nu sunt zgârieturi majore, arată excepțional după 40 ani

NU SCHIMB!

https://audio-database.com/VICTOR/player/ql-y66f.html

This is a full-auto player that pursues sound quality equivalent to that of manual machines.

For the turntable, diameter 35 cm, weight 2.9 kg (including mat), inertial mass 560kg-cm2As a result, the inertia mass is increased by more than 30% compared to a 30 cm diameter turntable with the same weight and shape, and basic rotational performance is improved.

A magnetic support DD motor is used to reduce the bearing load and friction caused by the heavy turntable, as well as the downward force caused by the rotor magnet.
In the magnetic support system, the rotor is located below the rotor yoke and the suction force is applied upward. As a result, the bearing load is reduced to about 1/10 of that of the conventional system, to only about 500g, thus reducing noise and wear caused by bearing friction.

An ED (electro dynamic) servo arm is used for the tone arm.
The ED servo tone arm is an electronic Q damping arm that detects vibration of the arm by two pairs of coreless linear motors directly connected to horizontal and vertical bearings, and cancels the vibration by generating inverse torque by feedback control of a microcomputer. This suppresses needle skipping and intermodulation distortion induced by low frequency resonance. In addition, full automatic operation is possible without touching the arm body by volume and button operation.
In addition, manual operation is also supported and the arm can be moved by hand.

An up pipe replacement system is adopted, and straight and S-shaped arm pipes can be replaced freely.
The height of the arm can be adjusted. In addition, since the dynamic balance system is adopted, the movement of the arm is not affected even if the player leans.

The cabinet uses a rose-like all-wood cabinet with mirror finish.

The servo circuit uses a double-servo quartz circuit with 30 times higher quartz lock stability than conventional ones.

Equipped with a turntable independent start / stop switch that can be used for manual operation, etc.

Type Record player
Motor FG Detection Coreless DC Servo
Wow flutter 0.005% (RMS, Rotating Part FG Method)
Signal-to-noise ratio 80dB(DIN-B)
Tone arm ED servo, pipe exchange system
Weight of mounted cartridge 4.5 ~ 21g (Including Shell)
Up to 35g (using SW-Y66F, including shell)
Needle pressure adjustment range 0 ~ 3g
External dimensions Width 495x Height 187x Depth 405 mm
Weight 12.3kg