The ICON DT-6A air Active Studio Monitor System provides a smooth and accurate response which makes the system pleasant to listen to. It is equipped with ICON’s innovative “AirCon” wireless control module which enables you to have ultimate wireless control on your studio settings. Below you see some of its main features.

Compact high performance active studio monitor
Active 2-Way Monitor System with complex Active Crossover design
The ideal solution for near-field monitoring in any recording or broadcasting facility
Designed for use in stereo as well as multichannel setups
Tuned by top-skilled acoustic engineer’s ear to fulfill any requirements in real recording studio environments
High, Mid and Low range contour control
High-Pass Filter – Flat, 60Hz & 80Hz selectable
Bi-Amped: 120W (LF), 60W(HF)
R-Type Transformer for super clean output
Mid/Woofer
ICON Custom designed 6.5” woofer
Nomex® reinforced paper cone for crisp, clean and very open reproduction
Low loss SBR surround with low creep and long time reliability
Progressive spider to achieve soft clipping and low distortion even under extreme load
Heavy dual magnet ferrite magnet system with extended height for superb bass reproduction
Aluminum short circuiting ring and cupper cap in magnet system that practically eliminates motor distortion
Very rigid die-cast aluminum chassis with very open geometry for optimized air-flow to eliminate compression
Tweeter
High-end 1” dome tweeter
Soft fabric dome and surround with wide-dispersion optimized geometry
Big surround to reduce distortion
Low loss ferrofluid-free magnet system for open and detailed sound
Heavy ferrite under hung dual magnet system for high sensitivity and low distortion
Extended and air-flow optimized back cavity to ensure low compression and low resonance frequency
Rugged die-cast aluminum faceplate with wide-dispersion optimized geometry.
Cabinet
Robust and very rigid design
Diffraction optimized smooth front baffle design
Extended front baffle dimensions to eliminate any vibration or sound radiation from the enclosure
Premium absorbing material for long life high performance bass reproduction
AirCon™ Wireless Controller Module fully integrated
Remote controlled Volume and Mute
High, Mid and Low range contour control
High-Pass Filter – Flat, 60Hz & 80Hz selectable
LCD Display (Graphic type)

Specifications
System: Two-way active nearfield monitor
Frequency Response (+/-3dB): 45 Hz – 25 kHz
Max SPL 2 m, pair in listening room (IEC Short Term): 113 dB peak
Bass Principle: Bass reflex
Tuning Frequency: 45 Hz
Tweeter: 1″ wide dispersion silk dome
Woofer: 6.5″ Nomex paper cone
Magnetically shielded/compensated: Shielded and Compensated
Cross over frequency: 2.5 kHz
Cross over slope: 24 dB/oct (LP and HP)
Input level for 100dB SPL @ 500-2000 Hz avg @ 1 m: 0 dBu RMS @ 0 dB level setting
Input connectors: Balanced XLR
LCD: Graphic type, white backlit
User settings (on the rear panel)
Power: 2 pos switch (On/Off)
Input sensitivity: 20 pos encoder (0 dB to mute)
High Pass Control: Digital switch (Flat / 60 Hz / 80 Hz)
Bass control: Digital switch (-2 dB / 0 dB / +2 dB)
Midrange control: Digital switch (-2 dB / 0 dB / +2 dB)
Treble control: Digital switch (-2 dB / 0 dB / +2 dB)
Power consumption – Idle: 15W / Max: 180W
Amplifier power – Tweeter: 60W / Woofer: 120W
Internal cabinet: volume 12.0 liters
Weight: 12.0 kg (26.4lbs)
Dimensions (WxHxD): 208 x 334 x 322 mm / 8.2” x 13.2”x 12.7”

AirCon™ Wireless Controller Module este nou sigilat la cutie.
Puteți obține, de asemenea, fără AirCon Controller la prețul de 2000
Poze 3 si 4 real.